A comprehensive technical manual on the HCIC 7-Ton to 12-Ton Telescopic Dump Trailer Hoist Cylinder (78" Stroke, 3000 PSI), detailing 3,000 PSI continuous operating pressures, 78" to 144" stroke options, front-mount trunnion and pin configurations, 1.6 to 4.6 gallon fluid displacement sizing, SAE #8 ORB leak-free porting, and chassis integration for commercial tandem-axle dump trailers and medium tipper bodies.
Retracted Length:
34.75"Extended Length:
112.75"Stroke:
78"Dump Body Size:
12-to-20 ftPayload Rating:
7 to 12 TonIn modern commercial dump trailer design (12-foot to 20-foot body lengths), mounting the hoist cylinder at the front bulkhead inside a "doghouse" enclosure provides significant mechanical and structural advantages over traditional underbody scissor hoists:
| Item | Specification |
|---|---|
| Cylinder Model | HCIC 7–12 Ton Multi-Stage Telescopic Cylinder |
| Retracted Length | 34.75" |
| Extended Length | 112.75" |
| Stroke | 78" |
| Dump Body Size | 12-to-20 ft |
| Payload Rating | 7 to 12 Ton |
| Mount Style | Front Bulkhead Mount |
| Pivot Point | Rear Hinge Pivot |
Specifying the HCIC 7-Ton to 12-Ton Telescopic Dump Trailer Hoist Cylinder guarantees commercial trailer builders a rugged, compact lifting unit engineered specifically for front-mount installations.
When plumbing the HCIC 7-Ton to 12-Ton Telescopic Dump Trailer Hoist Cylinder into 12V/24V DC or engine-driven PTO hydraulic power units, matching fluid displacement volume is essential:
1. Displacement Volume Sizing (1.6 to 4.6 Gallons): Because multi-stage telescopic sleeves are single-acting or power-up/gravity-down units, fluid displaced during full stroke must be supplied directly from the reservoir tank.
A 78" stroke model requires approximately 1.6 to 2.2 gallons of usable oil.
Longer 120" to 144" stroke models require up to 4.6 gallons of usable hydraulic fluid.
Bodybuilder Rule: Always size the hydraulic reservoir tank to be at least 1.5× the cylinder displacement volume to prevent pump cavitation when the hoist is fully raised at maximum dump angle.
2. SAE #8 ORB (3/4-16 UNF) Leak-Free Porting: Traditional pipe-thread (NPT) ports frequently leak under 3,000 PSI vibration and temperature fluctuations. The HCIC telescopic cylinder features precision SAE #8 O-Ring Boss (ORB) threads, ensuring an elastomeric face-seal that remains 100% leak-free over thousands of high-pressure dumping cycles.
The HCIC telescopic dump cylinder series is manufactured in high-strength alloy steel to withstand dynamic road vibrations and off-center payload shifts:
| Dimensional Parameter | Standard 78" Stroke Model | Extended 120"–144" Models | Engineering & Sizing Notes |
|---|---|---|---|
| Rated Hoist Capacity | 7-Ton Nominal / 12-Ton Class | 7-Ton to 12-Ton Class | Optimized for 12 ft to 20 ft commercial dump trailers |
| Operating Working Pressure | 3,000 PSI (20.7 MPa) | 3,000 PSI (20.7 MPa) | Heavy-duty continuous fluid power rating |
| Retracted Pin-to-Pin Length | 34.75" – 35.50" | 42.25" – 48.75" | Fits compact front bulkhead doghouse enclosures |
| Total Extended Reach | Approx. 112.75" | Approx. 162" – 192.75" | Delivers 48° to 52° clean tipping angles |
| Total Stroke Travel | 78.0" (1,981 mm) | 120.0" – 144.0" (3,657 mm) | Multi-stage cascading seamless steel sleeves |
| Hydraulic Port Standard | SAE #8 ORB (3/4-16 UNF) | SAE #8 ORB (3/4-16 UNF) | Positive O-ring boss sealing against vibration |
| Hydraulic Oil Requirement | 1.6 – 2.2 Gallons | 3.2 – 4.6 Gallons | Usable reservoir capacity required per cycle |
| Mounting Architecture | Top Pin / Base Trunnion | Top Pin / Base Trunnion | Accommodates angular tipping rotation |
| Unit Net Weight | 90 kg (198 lbs) | 105 – 125 kg (231 – 275 lbs) | Solid high-strength seamless alloy steel construction |
| Shipping Package Size | 146 × 41 × 51 cm | 175 × 45 × 55 cm | Reinforced wooden crate (Gross weight: 120.0 kg) |
Trailer manufacturers standardizing on the HCIC 7-Ton to 12-Ton Telescopic Dump Trailer Hoist Cylinder achieve consistent interchangeability across their entire commercial tipper product lines.
To ensure maximum seal longevity and smooth multi-stage sleeve extension, follow this 4-step workshop installation protocol:
Step 1: Doghouse Bulkhead Clearance Verification: Verify that the trailer front doghouse compartment provides at least 1.5 inches (38 mm) of lateral clearance around the cylinder body throughout its entire angular swing from 0° flat transport to 50° full dump.
Step 2: Trunnion Pin Axis Leveling: Using a precision digital inclinometer, ensure the lower trunnion mount bracket axis is square to the trailer frame rails within ±0.5 mm (±0.05°). Misaligned trunnions induce bending moments that accelerate wear on internal guide bushings.
Step 3: Hydraulic Line Plumbing & Flow Velocity: Connect a minimum 1/2-inch inside diameter high-pressure hose to the SAE #8 ORB port. Avoid restrictive 90-degree street elbows directly at the cylinder port to ensure rapid gravity-down lowering speeds.
Step 4: Bleeding Trapped Air on Initial Commissioning: Fill the hydraulic reservoir, cycle the cylinder through three full stroke extensions at low pressure (< 500 PSI), and allow trapped air to return to the vented reservoir tank.
Manufactured at HCIC's advanced fluid power production facility in Jinan, Shandong, China, our telescopic dump cylinders undergo 100% full-stroke pressure testing before dispatch:
Request Your OEM Quotation: To order the HCIC 7-Ton to 12-Ton Telescopic Dump Trailer Hoist Cylinder or request custom pin-to-pin retracted heights (such as 34.75"–35.5"), contact HCIC engineering directly at "info@jnhcic.com".