A technical overview of the HCIC Heavy Duty Welded Hydraulic Cylinder for 20-Ton Small Dump Truck Hoists, covering 3,000 PSI operating pressures, 1.5" to 5.0" bore options, double-acting power-down operation, standard cross-tube pin mounting, and chassis integration for commercial tippers and agricultural dump bodies.
Brand / Manufacturer:
HCIC/OEMPower & Structure:
luid Power Hydraulic / Double-Acting Welded Piston CylinderContinuous Working Pressure:
3,000 PSIBore Diameter Sizing:
1.5" to 5.0" precision-honed steel barrelPiston Rod Diameter Range:
1.0" to 2.5" high-tensile chrome-plated solid rodStroke Length Range:
4.0" to 36.0"The Heavy Duty Welded Hydraulic Cylinder for 20-Ton Small Dump Truck Hoists is engineered to fit directly into standard commercial dump truck frames and trailer scissor hoist assemblies:
| Specification Parameter | Standard Range (Imperial) | Metric Equivalent | Engineering Notes & Function |
|---|---|---|---|
| Working Pressure | 3,000 PSI | 20.7 MPa / 207 bar | Continuous duty rating for heavy tipping cycles |
| Bore Diameter | 1.5" – 5.0" | 38.1 mm – 127.0 mm | Sized to generate up to 20-ton hoist breakout capacity |
| Rod Diameter | 1.0" – 2.5" | 25.4 mm – 63.5 mm | Hardened and hard-chrome plated solid steel rod |
| Stroke Range | 4.0" – 36.0" | 101.6 mm – 914.4 mm | Accommodates direct-push and scissor hoist geometries |
| Retracted Pin-to-Pin | 12.25" – 48.25" | 311.2 mm – 1,225.6 mm | Compact closed height to fit inside truck chassis rails |
| Extended Pin-to-Pin | 16.25" – 84.25" | 412.8 mm – 2,139.9 mm | Delivers 45° to 50° dump angles for rapid material discharge |
| Pin Eye Sizes | 1.000", 1.250", 1.500" | 25.4 mm, 31.75 mm, 38.1 mm | Standard cross-tube bushings for quick chassis mounting |
| Construction Style | Heavy Welded Steel | Welded End Plug & Gland | Eliminates tie-rods for a narrower outer diameter profile |
| Operating Circuit | Double Acting | Bi-Directional Fluid Flow | Powered up and powered down for cold-weather cycling |
When building or retrofitting a 20-ton capacity small dump truck or tandem-axle utility dump trailer, underbody space is tightly restricted by drive shafts, exhaust routing, and cross-members.
Specifying the Heavy Duty Welded Hydraulic Cylinder for 20-Ton Small Dump Truck Hoists provides commercial bodybuilders with distinct structural advantages over traditional tie-rod designs:
The HCIC welded cylinder utilizes a heavy-duty cross-tube mounting configuration at both the base and rod ends, offering seamless mechanical integration with OEM hoist kits:
1. Standardized Pin Sizes (1.000", 1.250", 1.500"): Precision-bored cross tubes allow direct drop-in replacement across major North American and European dump body brands without re-drilling hoist brackets.
2. Integrated Grease Zerks: Each cross tube is equipped with a standard grease fitting and internal lubrication channel to purge road grit and prevent pin galling during continuous tipping operations.
3. High-Strength Welded Seams: Automated submerged-arc welding bonds the cross tubes to the cylinder barrel and rod end, ensuring full-penetration weld integrity capable of withstanding repetitive shock loads when asphalt or gravel slides off the dump bed.
Standardizing on the Heavy Duty Welded Hydraulic Cylinder for 20-Ton Small Dump Truck Hoists guarantees fleet compatibility and minimizes replacement downtime across mixed equipment inventories.
Every hydraulic cylinder manufactured at the HCIC facility in Shandong, China undergoes rigorous testing before shipment:
As an established fluid power manufacturer in Shandong, China, HCIC provides competitive factory-direct sourcing for commercial vehicle builders, agricultural machinery manufacturers, and hydraulic distributors worldwide.
When requesting a quotation for the Heavy Duty Welded Hydraulic Cylinder for 20-Ton Small Dump Truck Hoists (3000 PSI), provide: