4TG-E90-1000 Trailer Hydraulic Cylinder + Custom Power Unit Combo

When you’re in logistics, construction, or mining, a trailer’s hydraulic lift system makes or breaks how well the job gets done—plain and simple. If it’s shaky or wears out fast, you’re looking at delays, extra costs, and even safety headaches. Our 4TG-E90-1000 Trailer Hydraulic Cylinder, paired with its custom power unit, isn’t some new gadget; it’s a workhorse that’s been out in the field for years, proving itself to trailer builders and operators all over the world. It fits right, runs strong, and holds up—no fancy promises, just reliable performance you can trust day in and day out.

I. Hydraulic Cylinder: Lightweight, But Tough Enough for Heavy Lifts

1.1 Lightweight Build Cuts Down on Trailer Stress

HCIC 4TG-E90-1000 cylinder only weighs about 28kg, and that’s no accident. We tweaked the design to strip out unnecessary bulk without skimping on strength. Less weight on the trailer means better gas mileage for long hauls, less wear on the chassis and suspension, and easier handling all around. And you don’t need a crew of experts or big lifting gear to install it—two or three people can get it on or off in no time. That’s less downtime and more time getting the job done.

1.2 Quality Materials That Stand Up to Rough Work

We build the cylinder barrel from high-grade cold-drawn seamless steel, then heat-treat it to make it extra tough against bending and pressure. The piston rod gets a thick, smooth chrome plate—way thicker than the cheap stuff—so it doesn’t scratch, rust, or wear down, even when you’re working in mud, gravel, or salty coastal air. This isn’t just parts bolted together; it’s built to take a beating and keep going.

1.3 Seals That Stop Leaks for Good

Leaky hydraulics are the worst—they waste oil, slow you down, and cost money to fix. That’s why we use top-shelf imported seals and a new seal design that locks in the pressure, even when the cylinder’s working hard. These seals last 30% longer than standard ones, so you won’t be stopping to patch leaks in the middle of a job. And because the seals slide smooth against the piston rod, the cylinder moves up and down fast and steady, no jerky movements.

1.4 Perfect Stroke and Fit for Most Trailers

With a 1000mm stroke, this cylinder hits the sweet spot for most dump trailers, flatbeds, and farm trailers. We used standard mounting sizes, too—so if you’re replacing an old cylinder, you don’t have to cut or weld anything to make it fit. It’s a drop-in replacement, plain and simple. New trailer builds? It fits those just as easy. No custom mods, no extra costs—just install and go.

II.Custom Power Unit: Built to Match the Cylinder’s Strength

2.1 Specs That Deliver the Right Power

This power unit isn’t a one-size-fits-all part; it’s made specifically for the 4TG-E90-1000 cylinder, so every part works in sync:

• 12V DC Power: Plugs right into your trailer’s battery—no need for expensive power converters or extra wiring.

• 1.6KW Motor: Plenty of power to lift heavy loads fast, but it doesn’t guzzle battery power. It’s 20% more efficient than generic 1.6KW units, so you won’t be stuck with a dead battery halfway through the day.

• 2.7cc/r Gear Pump: Pumps oil smoothly, with almost no pressure spikes. That means the cylinder lifts steady, no sudden jolts that could spill cargo or damage the trailer.

• 20MPa Pressure Rating: Handles heavy loads with ease—full loads of gravel, construction debris, or farm materials are no problem at all.

• 10L Round Iron Oil Tank: Made from thick steel, so it doesn’t dent or leak when the trailer bounces over rough roads. Inside, there’s a baffle to keep the oil from sloshing around, which stops the pump from sucking air and wearing out early.

2.2 Cools Itself for All-Day Use

Hydraulic systems get hot when they work hard, and hot oil means slow performance and worn-out parts. This power unit’s tank has a smart flow design and heat-dissipating fins that keep the oil cool, even on 90-degree days or when you’re lifting loads 20 times in a row. No need to stop and let it cool down—just keep working.

2.3 Easy to Fix and Maintain

You don’t need a hydraulic expert to take care of this power unit. It’s built with modular parts, so if something breaks, you just swap out the part instead of replacing the whole unit. Daily maintenance is even simpler: check the oil level and make sure the oil’s clean. No fancy tools, no complicated steps—just a quick once-over, and you’re good to go. That saves you money on repair bills and keeps the trailer moving.

III.Works Everywhere, Proved by Real Users

3.1 Fits All Kinds of Trailers and Jobs

This cylinder and power unit combo works for just about any trailer that needs to lift heavy stuff: dump trailers for construction, flatbeds for hauling equipment, farm trailers for hay or grain, even sanitation trailers for trash pickup. It doesn’t matter if you’re driving on a smooth highway, a rutted mining road, or a muddy farm lane—this system keeps going.

3.2 Users Swear By It, All Over the World

We’ve shipped this combo to customers in the US, Europe, Australia, and beyond, and the feedback’s the same: it lasts. We’ve heard from operators who use it 20+ times a day, six days a week, and it’s still running strong after three or four years—no major repairs, no breakdowns. Trailer manufacturers love it too; it’s their go-to part because it fits right, works every time, and their customers don’t complain about it.

3.3 Quality You Can Count On, Backed by Our Warranty

We’ve been building hydraulic parts for 26 years, so we know how to make things that last. Every cylinder and power unit goes through a bunch of tests before it leaves the factory: high-pressure leak tests, run tests with no load, and long tests with heavy loads. We’re ISO9001 and CE certified, so you know we follow the strictest quality rules. And if something does go wrong (that’s rare), we offer a 1-year warranty—we’ll fix it or replace parts for free, no hassle.

At the end of the day, you don’t need a hydraulic system that’s full of fancy features. You need one that works, that fits, and that doesn’t let you down. The 4TG-E90-1000 Trailer Hydraulic Cylinder and its custom power unit are exactly that—simple, tough, and proven. It’s the kind of part you install once and forget about, because it just keeps doing its job.

IV.Contact Us:

CIC is a professional hydraulic manufacturer, mainly engaged in hydraulic system design, manufacture, installation, transformation, commissioning and hydraulic components brand sales and technical services.We hope that our product can help to save your cost and improve your quality. For More details please email us "davidsong@mail.huachen.cc" or google search "HCIC hydraulic"