Reviewing OEM specifications and turnkey installation components for the HC-516 16-Inch Stroke Scissor Hoist Hydraulic Cylinder Kit for 12-Ton Dump Trailers, featuring a 5.0-inch bore, 16.0-inch stroke, 2.0-inch heavy rod, 5.8 to 12.8-ton lifting capacity range, and patented velocity fuse safety valving for 10-to-14-foot commercial dump bodies.
Equipment Classification:
Scissor Hoist Kit for Dump Trailer & Utility TrucksCylinder Working Bore Diameter:
5.0 inches (127.0 mm precision honed steel)Cylinder Net Stroke Length:
16.0 inches (406.4 mm active travel)Induction-Hardened Rod Diameter:
2.0 inches (50.8 mm solid alloy steel)When dumping 10 to 12 tons of wet crushed gravel or demolition rubble from a 12-foot utility trailer, the initial breakout lift angle is where direct-push underbody cylinders struggle most. Mounted at a flat horizontal angle, a direct-push cylinder requires enormous hydraulic pressure just to initiate the first two inches of bed elevation.
A well-engineered scissor hoist solves this geometry challenge through mechanical leverage multiplication.
The HC-516 16-Inch Stroke Scissor Hoist Hydraulic Cylinder Kit for 12-Ton Dump Trailers utilizes a heavy-gauge structural scissor frame paired with a 5.0-inch bore double-acting cylinder. By redirecting horizontal cylinder stroke into immediate vertical upward thrust, the HC-516 delivers a versatile 5.8 to 12.8-ton tipping capacity range while maintaining a compact 5.28-inch mounting height between trailer frame rails.
| Technical Parameter | Catalog Specification / Workshop Baseline |
|---|---|
| Model Designation | HC-516 |
| Equipment Classification | Scissor Hoist Kit for Dump Trailer & Utility Trucks |
| Cylinder Working Bore Diameter | 5.0 inches (127.0 mm precision honed steel) |
| Cylinder Net Stroke Length | 16.0 inches (406.4 mm active travel) |
| Induction-Hardened Rod Diameter | 2.0 inches (50.8 mm solid alloy steel) |
| Overall Assembled Body Length | 46.7 inches (1,186.2 mm frame footprint) |
| Collapsed Mounting Height Profile | 5.28 inches (134.1 mm low-profile clearance) |
| Rated Tipping Capacity Range | 5.8 to 12.8 Metric Tons (12,800 to 28,200 lbs) |
| Total Complete Kit Weight | Approx. 260 lbs (118.0 kg with hinges and brackets) |
| Safety Valving Architecture | Patented velocity fuse load control safety valve |
| Standard Kit Inclusions | Cylinder, hinges, scissor frame, brackets, prop kit |
| Catalog Page Reference | HCIC 2026 Master Product Catalog, Page 15 |
A major safety hazard on dump trailers is hydraulic line rupture while an operator inspects the raised bed. The HC-516 16-Inch Stroke Scissor Hoist Hydraulic Cylinder Kit for 12-Ton Dump Trailers incorporates a patented internal velocity fuse valve integrated directly into the cylinder port. In the event of a sudden hose failure, the valve automatically restricts return flow, lowering the loaded or empty dump box at a controlled, safe speed of under 2 inches per second rather than free-falling.
Keeping the trailer bed's center of gravity as low as possible improves highway towing stability and allows easier loading of mini-excavators or skid steers over the rear tailgate. The HC-516’s compact 5.28-inch collapsed height tucks neatly between standard 6-inch C-channel trailer crossmembers without requiring body lift spacers or chassis modifications.
Each HC-516 16-Inch Stroke Scissor Hoist Hydraulic Cylinder Kit for 12-Ton Dump Trailers ships as a factory-matched package designed for fast fabrication and reliable field operation:
[ 5" Bore HC-516 Cylinder ] -----> [ Heavy Structural Scissor ]
[ (2" Solid Chrome Rod) ] [ (Greaseable Pivot Pins) ]
↓ ↓
[ Patented Velocity Fuse ] -----> [ Steel Safety Prop Arm ]
[ (Anti-Rupture Descent) ] [ (Cup & Chassis Support) ]
To achieve maximum tipping capacity and smooth operation on 10ft to 14ft dump trailer beds:
Single-acting cylinders use hydraulic pressure for extension only, retracting by load weight or spring. Double-acting cylinders use hydraulic oil to push both extend and retract, offering precise control for most industrial, trailer and machinery applications.
Yes. We support custom bore, stroke, rod diameter, mounting style, port thread (SAE / NPT), paint color, seal material and end fittings. Send us your specs or drawing for quotation.
External leakage usually comes from worn rod seals, dust wipers, scratched piston rod or loose fittings. Internal leakage leads to load drift, normally caused by damaged piston seals, contaminated hydraulic oil or overpressure.
Standard NBR seals for general temperature. PU seals for high wear. FKM / Viton seals for high temperature and anti-oil corrosion. Low-temperature seal kits are available for cold climate down to -40°C.
Confirm working pressure, required force, installation space, collapsed length and travel distance. Tell us your working load and mounting space, we can help calculate the right size.
We support SAE, NPT, BSPP and metric thread. Please confirm port standard before ordering to match your hydraulic hoses and valves.
Yes, matching seal kits for all our cylinder models are available separately for maintenance and on-site repair.
Standard warranty is 12 months against manufacturing defects. Damage from overload, misalignment, contaminated oil or improper installation is not covered by warranty.
Keep hydraulic oil clean, avoid side load and misalignment, lubricate pivot pins regularly, prevent rod surface scratches, and do not exceed rated working pressure.
Standard in-stock cylinders ship within 3–7 working days. Custom cylinders normally take 15–30 working days based on complexity and quantity.
Our hydraulic cylinders are widely used for dump trailer scissor hoists, farm equipment, lifting platforms, marine steering and engineering machinery. Tell us your application for proper recommendation.
Ready to outfit your commercial trailer production line with the HC-516 16-Inch Stroke Scissor Hoist Hydraulic Cylinder Kit for 12-Ton Dump Trailers?
Contact HCIC’s specialized trailer engineering desk in Jinan. We supply complete turnkey scissor hoist packages, standalone replacement cylinders, 12V DC power units with wireless remotes, and certified 3D STEP CAD models for chassis integration within 24 hours.
